Lower Residual Oil Castor Oil Extraction

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

Lower Residual Oil Castor Oil Extraction

Castorseed oil content is above 50%,and the kernel oil content is above 60%,so castorseed is a kind of important high energy plant.Castor oil and its Ramification are widely used in industry,national defense,agriculture,medicine,

paper making,rubber and other fields.

Castor oil extraction the flowing sections:

Castor oil pressing worskhop,castor oil refining worshop and all the technological equipment,electric,full automatic,installation material and installation,insulation of equipment,staff training of the worshops.

Castor oil project factory which we contract to build

Castor oil extraction flowchart:

Castor oil extraction main machine introduction:

1. Cleaning:

In order to obtain high effective cleaning, ensure good work condition and productionstability, high efficient vibration screen was used in the process to separate big and smallimpurity. Suction type Gravity stoner removing machine was applied to remove the shouLDrstone and earth, and magnetic separation equipment without power and exhaust system wereused to remove iron. Dust removing wind net is installed.

2.Crusher:

Castor seed was crushed and took advantage of thedifference of the specific gravity dividedinto Kerneland Shell.

3.Cooker:

1.To heat the protein in the cell wall untiLDnaturation and then condensation;to increase the

permeability of the cell wall, so that the oil is easy to flow out

2.to make small droplets condensed into big drops

3.Reduce the oil viscosity to make it flows easily

Cooking inquiry:cooked flakes shoud Born cooked evenly, both inside and outside,itsmoisture,tempreture and structural should meet the requirements of making oil

4.The mian import Castor oil extraction

Screw press machine is our new developed improved a new product . Can press rapeseed,peanuts,soybeans,

sesame,multiple cropping oil sunflower seeds and a variety of plants, tea oil ,and the machine micro electric control, infrared heating, vacuum filter, triple squeezing, can squeeze can also be cold heat squeeze , is the most ideal individual processing equipment.

We have all kinds of capacity of castor oil mill machine,common small capacity:

Castor oil extraction and flowchart:

Fuction of main parts

(1) Refining section: used to P-acid de-gumming, alkali refining de-acid and water rinsing.

(2) Decoloring section: used to remove off pigments, bleaching oils and grease dehydrate.

(3) Deodorizing section: to remove off the odor components in oil.

(4) Dewax: used to remove off the wax in the oil, in order to get the high quality oil.

(5) Heat-transfer oil stove: supply each device production needing heat energy, temperature reach above 280°C.

(6) Steam generator: produce the needing steam for de-odoring and distillation.

(7) Vacuum pump: supply needing vacuum for dehydrate, de-color, de-odor. Vacuum degree can reach above 755mm Hg.

(8) Press filter: filter clay, filter out clear oil.

(9) Air compressor: blow dry bleached clay, blow empty the leftover oil in the press filter.

Castor oil mill machine adapt to many materails:

Our main business:

• 10-500T/H oil material first cleaning,drying and storage section turn-key project.
• 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
• Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, LD separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
• 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
• 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
• 10-200T/D Fatty acid esterification production cooking oil production line.

At present, Lower Residual Oil Castor Oil Extraction is the most advanced oil press equipment in oil extracting and processing
machine. Small scale oil extraction machine is through forced feed by a screw shaft which
produce high temperature and pressure under the rotation and squeeze between screw shaft and
pressing ring. It is a extracting oil technique that make materials from crush and squeeze to
oil and cake, which belongs to physical press.

AAA1
Introduction of Lower Residual Oil Castor Oil Extraction
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification,
Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)Lower Residual Oil Castor Oil Extraction use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the
rancidity will be influence the palm crude oil acid value, if the acid value is very high, the
refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director