2012 sale palm kernel oil extraction machine

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.
Can undertake:
1 tons-500 tons of Nissan soybean, rapeseed, peanut, sunflower and other pressing refining production line
1 tons-500 tons Nissan corn germ, pepper, walnut oil, rice bran oil and other pressing refining production line
1 tons-500 tons of Nissan tea seeds, walnuts, almonds, cottonseed, sesame and other pressing refining production line
Product Advantages: Through dephosphorization, decolorization, acid removal, deodorization and other processes,
can make the gross oil to achieve national Standard Oil quality standards, refined refined oil color clear, long time storage without mucus, not degenerate, no flavor.

Specifications

Professional Home oil extraction machine
1.Home oil extraction machine
2.Cooking oil machine
3.Higher oil rate, Lower waste

oil extraction machine

After the pre-pressed or the oil press process, there are also has about 18% oil in the pre-pressed cake, it is potential wealth. Our extraction machine plant can promise you to make the oil out from the cake with low cost and high efficiency. Our machine is automatic, which is easy to operate and can save labour. We can offer the machine with different dealing capacity per day from 1t-1500t. Our machine plant nearly can be used for every kinds of oil plant ectraction.

The flow chart of Leaching workshop:

6→7→8→9→2

↑

1→2→3→4→10→11

↓

5→12→13→14→15→16→17

↓ ↓ ↓

7 7 7

↓ ↓ ↓

↓

8 →9→2

1.prepressed cake 2. 3.wet meal 4.LD 5.miscella 6.solvent 7.condenser 8.solvent/water separator 9.solvent sortage tank 10.finished product meal 11.meal gathering tank 12. 1st miscella 13. 2nd miscella 14.1st raising film evaporation 15. 2nd raising film evaporation 16.ubular stripping column 17.crude oil tank

Remark:the boldface in the flow chart is the main eauipment of the leaching workshop

Detail decription of the leaching workshop:

First, the pre-pressed cake goes through the stor box, and then the enmasse conveyor convey the pre-pressed cake to the rotary-type extractor through the seal auge. The rotary-type extractor rotates at the speed of 90-110miutes per circle, at the same time the pumps spray solvent to the rorary-type constantly. Thus, this process makes sure that the cake can be completely soaked, so that the oil in the cake can dissolve to the solvent maximumly and becomes the miscella(solvent and oil). After the soakage, the cake will becomes wet meal.

The next thing should to be done is separating the solvent in the miscella, and the solvent in the wet meal.

The miscella will be sent to the 1st miscella tank by the pump, then add 10% saline water to it. Along chemical reaction with the saline water, the phospholipid and impurities in the miscella will expand, cohesion and precipitate at last. So that can reach the goal of purifying the the miscella.

Next, pump miscella into raising film evaporation through the 2^nd tank. Most solvent will be gasified and evaporated when be heated due to low steam point thus greatly improve oil concentration. It can get rid of 85% solvent first time and 95% solvent for the 2^nd evaporator's processing. And residual solvent will be removed after gas stripping treatment.

Wet meal will be conveyed into desolventizer-toaster(LD)for desolventizing. Separated solvent gas will go to condenser and enter into water separator after cooling. Since the solvent density is smaller than water density, solvent will flow into solvent tank for recycling.

extraction plant part view

rotary-type extractor

At present, 2012 sale palm kernel oil extraction machine is the most advanced oil press equipment in oil extracting and processing machine. Small scale oil extraction machine is through forced feed by a screw shaft which produce high temperature and pressure under the rotation and squeeze between screw shaft and pressing ring. It is a extracting oil technique that make materials from crush and squeeze to oil and cake, which belongs to physical press.

AAA1
Introduction of 2012 sale palm kernel oil extraction machine
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)2012 sale palm kernel oil extraction machine use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

Pressing machine uses hydraulic control system to adjust
spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

 

 

 

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director