Small scale palm oil refining machinery for 1-80 TPH

Small scale palm oil refining machinery for 1-80 TPH

The process before oil refining is extraction,oil leaching is advantageous to oil refining.

Leaching is divided into three types :

1. Towline extractor : The amount of processing is 7000T/D .

2. Ring extractor : The amount of processing is 3000T/D.

3.Rotocel extractor: The amount of processing is 1500T/D.

The towline extractor working principle of leaching :

1. After pretreatment of the oil into the leaching, solvent (n-hexane) will be sprayed on the surface of the oil in the oil, most of the oil will be solvent extraction.

The oil concentration of the first funnel is relatively high, generally 60%-65%. Oil is directly pumped.

2. Oil after the second funnel, solvent will again sprayed on oil, again leaching, oil concentration and mixed oil obtained by solvent content is lower, more and more high.

3. Oil is shipped out extractor.

After leaching will get two products :

1. Mixed oil (oil and solvent) : Mixed oil first enters the first evaporation equipment, steam enters from the equipment below, mixed oil and steam full contact. The first evaporation in 0.006-0.08Mpa negative condition. The oil temperature is 105-110 C. Then enter the second evaporation, the same process.

2. The cake containing solvents : Solvent containing cake steamed into the offline, two layers of steaming offline is preparing to break free, full and cake contact, indirect heating of cake, then is Breathable layer -- desolventizing layer -- drying layer -- cooling layer

The last step leaching :

Steamed out of the solvent into the condenser for cooling, cannot be condensed gas into paraffin recovery system, and then enters the analytical column to paraffin absorption solvents, gas separation.

At present, Small scale palm oil refining machinery for 1-80 TPH is the most advanced oil press equipment in oil extracting and processing machine. Small scale oil extraction machine is through forced feed by a screw shaft which produce high temperature and pressure under the rotation and squeeze between screw shaft and pressing ring. It is a extracting oil technique that make materials from crush and squeeze to oil and cake, which belongs to physical press.

AAA1
Introduction of Small scale palm oil refining machinery for 1-80 TPH
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)Small scale palm oil refining machinery for 1-80 TPH use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

Pressing machine uses hydraulic control system to adjust
spacing between pressing bolts. So it can be suitable for various palm fruit species and guarantee the oil yield.

AAA3

Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director