High output palm oil extraction machine

Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.

Shandong Leader Machinery Co.,ltd. has finished hundreds of successful projects over the years: peanut oil, soybean oil, rapeseed oil, cottonseed oil, sunflower oil, sesame oil, animal oil,grape seed oil, acer truncatum oil, peony seed oil, walnut oil, hemp seed oil, pine oil, tea seed oil, papaya oil, milk thistle seed, and other special type oil.We have independent import and export department. Our equipment has been successfully exported to more than 100 countries: Russia, Australia, India, Afghanistan, Cameroon,and so on.

High output palm oil extraction machine

company profile

LD &Oil Machinery Co.,Ltd is a large-size joint-equity enterprise which specialize in producing edible oil mechanical equipment and it is also a group enterprise integrating scientific research, manufacturing, sales as one,

and our products have been sold all over the country and exported to more than 30 countries and regions such as Russia, India, South Africa, Ukraine, Nepal, Indonesia and so on

palm kernel balance:

palm kernel expeller Process Specification:

The palm oil is contained in palm pulp, the pulp is high moisture content and rich lipase.

1.Usually we adopt the methodof press to produce it, and this technology is very mature. Before press , Fresh fruit

bunch will be taken sterilizer andthresher pretreatment : After weighting the FFB , it is loaded the FFB conveyor by

loading ramp,

2.then the FFB will convey to the vertical sterilizer. FFB will be sterilized treatment in sterilizer, the FFB will be

heated and sterilized treatment for several time to avoid the lipase be hydrolyzed , after sterilizer ,the FFB is

distributed bunch conveyor by the mechanical bunch feeder and enter the thresher machine which separate the palm

fruit and bunch for the empty bunch ,it is conveyed empty bunch loading platform and transport it to outside the

factory area at fixed period , the empty bunch could be used as fertilizer and repeat use ; The palm fruit which has

passed sterilizer andthresher processing should be sent to digester and then go to special screw press to get the crude palm oil (CPO) form the pulp . But the pressed palm oil contain a lot of water and impurity which need to be clarified by sand trap

tank and treated by the vibrating screen ,afterward the CPO will be sent to clarification station treatment section .

3.For the wet fibre cake which be produced by screw press, after separating nut, it will be sent to boiler house to

burnt.

The wet fibre cake contain wet fibre and wet nut, the fibre contain about 6-7% oil and fat and a few of water .Before we produce the nut, we should separate the nut and fibre .

1).Firstly, the wet fibre and wet nut enter the cake breaker conveyor to be cracked, and mostly of the fibre should be

separated by pneumatic fibre depericarper System. The nut, little fibre and big impurity will be further separated by

the polishing drum.

2).The separated nut should be sent to nut hopper through the pneumatic nut transport system,

and then adoptthe ripple mill to crack the nut, after cracking , most of the shell and kernel will be separated by

cracked mixture separating system, and the rest of mixture of kernel & shell enter to the special clay bath separating

system to separate them, after this processing , we could get pure kernel (The shell content in kernel

the kernel will be conveyed to kernel storage bin for storage;

3).Usually the dry kernel’s capacity ratio is 4% . So it

should be collected until enough quantity, and then be sent to the palm kernel oil mill; For the separated shell, it

should be conveyed to shell temporary bin as the spare boiler fuel.

4.After screen and sand trap tank, the palm oil should be sent to crude oil tank and heat , then be pumped continuous

clarification tank to separate the purified oil which be sent to pure oil tank and the sludge oil which be sent to sludge

tank , whereafter the sludge oil should be pumped to the centrifuge to separate, the separated oil enter the

continuous clarification tank again; The pure oil in the pure oil tank should be sent to the oil purifier , and then enter

the vacuum dryer , at last the dried oil should be pumped collection tank.

Palm kernel recovery:

Pressed cake be transported by conveyor S110 to winnowing box G107, most of fiber on the Nut

surface will be removed, and the nut dropped into Kernel polisher A107 to get off the last fiber on the

surface of the nut. Then nuts will be transported to nut classification E101 by conveyor S113. After

classification the nut are husked in shucker A109, many shells will be blowed in Tube type air

separation unit F102. The residual material get in kernel classifier A108, and then get in the second

tube type air separation unit F101 to get ride of shells. When the shells be cleaned, the residual

material will be conveyed to drying tank T104, after be dried the kernel be transported to storage tank

T105. Then the kernel will be transported to press plant, pressed by kernel screw press machine

6YL-100RL.

We not only have our own factory,but aslo have our own lab.

our workshop and costomers:

our certificates:

The pam oil processing equipment is suitable for all kinds of crops:

If you have any needs ,please don't hesitate to contact me,i am glad to sevice for you!

Method of High output palm oil extraction machine
High output palm oil extraction machine production line includes two parts, one is pretreatment line, the other is oil seed press machine.

AAA1
Pretreatment part is used for cleaning and adjusting texture of the materials ,High output palm oil extraction machine can improve oil yield rate, reducing breakdown of the machines. General speaking, the pretreatment machines include Magnetic drum, Cleaning sieves, Sheller, Crusher, Flaking roll, Cooker, Softening pot , Puffing machine and so on. After pretreatment, the materials will be sent to oil expeller, then the crude oil got. Different materials have different pre-press methods. Shandong Leader Machinery Co.,ltd. usually collocate proper press line according to the customers' materials.

AAA2
Shandong Leader Machinery Co.,ltd. can produce all kinds of cooking oil machinery, which includes palm oil production machine, peanut oil production line, soybean oil, cotton oil, sunflwoer oil, corn oil, rice bran oil and other kinds of edible oil production line.
The whole production line includes High output palm oil extraction machine, oil extraction(solvent) machine, oil refining equipment,High output palm oil extraction machine palm oil fractionation equipment, sunflower oil dewaxing plant, decoloring process machine, deodorization process machine and other machine.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director