Small scale groundnut pretreatment preprocessing machines for groundnut oil

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

Small scale groundnut pretreatment preprocessing machines for groundnut oil

Groundnuts contain about 25% shell and 3% skin. Before taking oils and fats out of groundnuts by pressing or extracting, the mill needs to prepare it by cleaning, crushing, softening, flaking and cooking. Such Preparation is called peanut pre-treatment. We can design special pre-treatment machines for you according to your condition.

Cleaning: using different size cleaning sieves and magnetic destoner to clean the different

impurities. After going through this part, most of the impurities are moved from peanuts.

Crushing: materials are divided into small pieces.

Softening: by adjusting moisture and temperature, we make the small pieces soft.

Flaking: then materials are made into thin flakes which are easy to get more oil.

Cooking: raw flakes are cooked to make the oils and fats in cells easier to flow out.

Groundnuts pretreatment for small capacity

Machine advantage

1. High oil yielding, low oil residual in the cake. The oil left in cake is less than 6%. The cake

thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20 square meters space is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food

hygiene standards.

4. Easy operation. You should operate as per the instruction.

5. Spare parts: worm, squeezing head, worm shaft, cage bar, heater ring, cake outlet, vacuum filter.

Whole set of equipment for palm oil production line.

Motor and power control system.

Installation material.

Installation and test-run.

Drawing of process description, equipment layout, foundation and construction.

Drawing of power control.

Isolation and painting of equipment.

Water recycling and cooling system outside the plant (i.e. supplementary device).

Staff training and long-term technical service.

Main business field

10-500T/H oil material primary cleaning,drying and storage section turn-key project.

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.

100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,

LD separated machine, the full negative pressure evaporation,

Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).

30-1000T/D continuous physical (chemical) refining line.

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.

10-200T/D fatty acid esterification edible oil production line.

At present, Small scale groundnut pretreatment preprocessing machines for groundnut oil is the most advanced oil press equipment in oil extracting and processing
machine. Small scale oil extraction machine is through forced feed by a screw shaft which
produce high temperature and pressure under the rotation and squeeze between screw shaft and
pressing ring. It is a extracting oil technique that make materials from crush and squeeze to
oil and cake, which belongs to physical press.

AAA1
Introduction of Small scale groundnut pretreatment preprocessing machines for groundnut oil
1)Palm oil mill have main ten parts: Reception Station,Sterilizer,Threshing,Press,Clarification,
Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2)Small scale groundnut pretreatment preprocessing machines for groundnut oil use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the
rancidity will be influence the palm crude oil acid value, if the acid value is very high, the
refining efficiency will drop.
3)Generally speaking, the palm oil mill be mainly located in Nigeria,Malaysia,Indonesia etc..
AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director