edible coconut oil storage tank on sale

Shandong Leader Machinery Co.,ltd. have engaged in Oil Refinery Equipment and Microwave Equipment since1997 in China,with 20 years` experience and 80 engineers,, scientific research, manufacturing, installation, commissioning.We can provide customers with design and services of 1-2000 tons oil equipment.factory occupied area is over 100,000 square meters,more than 3200 customers all around the world, we greatly hope to have the opportunity to serve you.

Product Description:
According to customers on the type of oil, daily processing volume, oil standards and other conditions of the requirements of processing customization, size, refining the number of cans, product prices are different.

edible coconut oil storage tank on sale

Coconut contains 33% oil. It can be used as cooking oil. Its processing technology is coldpress extraction. We provide all machines necessary for a complete castor oil plant, including pre-treatment machines, press, solvent extractors, refinery machines, etc.

I. Coconut pretreatment

Before extracting oils and fats from coconuts, the mill needs to prepare it by cleaning, crushing, softening, flaking and cooking. For cleaning, we offer magnetic separator, aspirator or different size cleaning sieves, as shown below, to remove impurities from coconut.

Then, the temperature and moisture of coconut pieces will be adjusted by conditioner or softening kettle so that they become soft and wet enough for flaking. This step improves their ductility. Below is photo of softening kettle.

The flaking roll will make the wet soft coconut pieces into flakes. We have vertical flaking roll, multi-stage flaking roll, hydraulic flaking roll and spring flaking roll etc., as shown below.

II. Coconut oil press

The flakes will be pressed by continuous screw press firstly. After pressing, they fall into two parts: pressed oil and pressed cakes. The oils and fats in pressed cakes will be further extracted by solvent.

Main engine of coconut press machine

Main engine includes base, upright, top plate, oil drip pan nut and so on , it is one of the main parts. Firstly the oil material is put into the assembly of the press boring, then it is drove up by the oil cylinder piston. Oil will flow out from the gap of press boring, and then pass the oil drip pan to the drum for storage.

Hydraulic system of coconut press machine

Hydraulic system is the main power force of this machine, it includes transmission shaft, turbine, worm gear, gear pump, high pressure pump, overflow valve; super high pressure safety valve; hand-operated valve; seamless steel tube; pipeline connect and other spart parts. This machine adopts the advanced power pack of the word, and compared with two plunger pump. It is faster , higher pressure and can resist higher temperature. It can keep working when the oil is above 65 degree, but cooling unit is nessary.

Electronic system of coconut press machine

Electronic system is the most advanced part of this machine, it is fully automatic, easy to operate. There’s no special request to the operator, so this machine is particularly suitable for peasant. It is composed of motor, volt meter, pressure gauge, power insurance and so on.

Main Technical Parameters

Coconut oil press machine features

1. High oil yielding, low oil residual in the cake:The oil left in cake is less than 6%. The cake thickness can be adjusted once the machine stops running;

2. Compact size: only 10-20m2 is enough.

3. High purity: machine surface is made of chrome plated stainless steel, in line with food hygiene standards.

4. Easy operation. You should operate as per the instruction.

5. Components:Screw pressing part, Electrical controlling system, automatic heater, adjusting mechanism, driving unit and vacuum oil filter etc.

6.Convenient and safe: concise structure, small occupation area, it use the fully enclosed protection,convenient and safe operation.

III. Crude oil refining

Crude castoroil has a lot of impurities, such as phosphatide, free fatty acid, pigment, wax, sterol, sands, etc. We have to get rid of these impurities to get edible oil.

Degumming

There are many ways to move the mucilaginous impurities from crude oils and fats, for example, hydration, heating, adding acids, etc. We’ve hydration tank, acid refining mixer, etc., as shown below.

Deacidification

This step is to remove pigment from crude oil to adjust its color. You can adjust according to the requirement of your market. We’ve acid refining tank.

Deodorization

This step is to move unpleasant smell from crude oil. This is an important station for refined oil. We’ve deodorizing tank.

Whole set of equipment for palm oil production line.

Motor and power control system.

Installation material.

Installation and test-run.

Drawing of process description, equipment layout, foundation and construction.

Drawing of power control.

Isolation and painting of equipment.

Water recycling and cooling system outside the plant (i.e. supplementary device).

Staff training and long-term technical service.

Main business field

10-500T/H oil material primary cleaning,drying and storage section turn-key project.

100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot dehulling, bean skin crushing, the soybean extrusion, high oil contained pre-pressed cake extrusion and high oil contained flakes puffed directly). Rice bran turn-key project.

100-3000 T/D leaching workshop turnkey project (towline extractor, rotocel extractor, loop type extractor,

LD separated machine, the full negative pressure evaporation,

Paraffin wax recovery, leaching workshop degumming, phospholipid concentration).

30-1000T/D continuous physical (chemical) refining line.

20-3000T/D sunflower oil, rice bran oil, corn germ oil dewaxing turnkey project.

10-200T/D fatty acid esterification edible oil production line.

Introduction of edible coconut oil storage tank on sale:
Integrated oil press is an advanced screw oil expeller. This kind of automatic combined oil press machine is very popular in edible oil making market nowadays. Different with traditional oil press, the integrated oil press can save labor power and simplify the oil making process.

AAA1

Main Structure of edible coconut oil storage tank on sale:
This combined oil expeller is composed by four parts: feeder, press chamber, electrical control panel
and vacuum filter drum. The heating system is inside the press cage. The filtering drum is vacuum
filter with sight glass.
The oil sight glass can help user to control the speed of oil clearing process. Integrated oil press
machine is an ideal choice for those who do business in the country market or who
run a small or medium oil mill in city.

AAA2

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director