The most effective ODM/OEM gypsum board manufacturing machine

The most effective ODM/OEM gypsum board manufacturing machine

• Annual capacity of gypsum board manufacturing machine:

2 to 30 million sq.m

• Type:

Hot air and hot oil

• Degree of automation:

Fully automatic and semi automatic

• Fuel for the boiler:

Natural gas,coal,desel,heavy oil,light oil etc

• Final product specification:

Common,fireproof,waterproof gypsum board

7 to 15mm in thickness

1800 to 3600mm in length

1200 and 1220mm in width

Paper supply system__________________________________________________________________

• Broken rate of paper
• Degree of automation

• Mainly consists of paper slurry,foaming agent,starch,water and additive etc

• All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement

• This part is mainly the forming of wet gypsum board
• Can be adjusted manually

Cutting system_______________________________________________________________________

• Whole cut control algorithm is achieved by the separate PLC.

Drying room_________________________________________________________________________

• Low heat consumption, heat preservation is good

The application of final product gypsum board:

• Suspended ceiling
• Partition wall

Hot oil pipe

Belt conveyor scale

Machining advantages of gypsum board machine:

• All the raw materials and finishing treatment are certified by our suppliers and must passreceiving inspection before they are released for production;
• Products are precisely machined with high assembling accuracy.

Above loading photos are for your reference:

Service idea:all the customer concern is supposed to be paid close attention, fulfil our trust,

try our best to enter the acme of perfection.

• Factory area:40000sq.m
• Direct manufacturer with 16 years experience till 2015;
• Our company has its own R&D team,then we can continuously provide customers with The most effective ODM/OEM gypsum board manufacturing machine technology;
• Has its own installation and debugging team;
• Service tenet:outstanding idea,excellent team, high quality service.

1.Guarantee:

3 years (except the easy worn parts such as bearings, electric buttons).

2.Installation and debugging:

2 to 4 months when the buyer prepare the installation and commission conditions.

3.Technology training:

Provide free training.

4.In order to guarantee the machine running, each year we will send engineer to check

and development the technology with the buyer.

5.If the buyer can not run the machine well then we will send the production engineers to help

the buyer to run the machine, and we can cooperate for long terms.

We want to know________________________________________________________________

1. Do you have gypsum powder?If have,pls give us its test report.
2. How much annual capacity do you interested in?Our offer is based on an assumption that the final product of gypsum board is 9.5mm in thickness.
3. Which type of the fuel for heating?natural gal,coal,diesel,heavy oil or light oil?
4. Method of the drying room?Hot air or hot oil?
5. Pls tell us your land area.
6. Degree of automation of gypsum board production line?

The most effective ODM/OEM gypsum board manufacturing machine adopts world-class technology to customize and produce special racks. High strength, high wear resistance, sharp teeth, uniform and delicate powder slag processing, higher starch extraction rate. The replacement of racks is quick and easy, which greatly reduces the labor intensity of labor and greatly increases the production efficiency. The separation part adopts a non-frame-type three-section separation structure with low resistance and more energy-saving.
main functions:
For the extraction of potato starch, automatic fresh potato feed, crushing, separation, slagging, pulping. The machine is also suitable for sweet potato, sweet potato, hawthorn, kudzu, pThe most effective ODM/OEM gypsum board manufacturing machinen, and cassava.
The most effective ODM/OEM gypsum board manufacturing machine advantages:
1: The smashing part is the first to use thorn bar type, discarding the manual sprint method in the past.
2: The lifespan of steel piercing teeth is twice the life of the previous piercing teeth, and can be replaced within ten minutes after wear.
3: The separation section uses a thick 40cm diameter separation tube, the separation is cleaner, and the powder extraction rate is more than 99%.

Jinan Joysun Machinery Co., Ltd. professional R & D and production of microwave aging equipment from whole grains, microwave equipment all over the country, are exported to Vietnam, India, Russia, Hong Kong, Taiwan and other places. The warm and hospitable Yuehong people adhering to the business philosophy of "scientific innovation, integrity, sustainability, quality first, excellent service", we sincerely provide you with practical, market-competitive prices and high quality and efficient service. Jinan Joysun Machinery Co., Ltd.. With a test platform, you are always welcome to test with materials, to discuss cooperation!

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director