2014 new type palm oil refining

Specifications

new type palm oil refining
high oil quality,continuous and batch types,stailess steel material,for all kinds of oil material

2014 New type palm oil refining

Mananger:Annie

Tel:+8615237168511

Skype:goldpenguin9713

New type Edible oil refining methods of oil refinery:

1)chemical refining 2) physical refining 3)chemical-physical refining

The classical alkaline refining method usually comprises the following steps:

What is edible oil Refining?

The crude oil obtained either from expellers or solvent extraction plant contains impurities, which must be removed to make the oil edible, more palatable and stable against rancidity upon storage. The process of removing these impurities is called refining.

Edible oil refining machine for many materials:

The main equipment

1.Neutralization tank:It is used for phosphoric acid degumming,alkai deacidification washing.

2.Bleaching tank:It is used for removing pigment,grease bleaching&dehydration.

3.Deodorization tank(by stainless steel):It is used for removing odor and peculiar smell.

4.Conduction oil furnace:It can provide the steam for deodorization.

5.Steam generator:It can provide the steam fo deodorization.

6.Vaccum pump:It can provide the vaccum for dehydration,bleaching and deodorization.The vacuity can reach above 755mmHg.

7.Filter press/Leaf filter:It filtrates bleaching earth for getting clear oil.

8.Air compressor:It dries the bleching earth,and blows the residual oil of filter away.

9.Oil pump:It covers the oil.

The classical alkaline refining method usually comprises the following steps:

Step 1.Degumming with water to remove the easily hydratable phospholipids and metals.

Step 2.Addition of a small amount of phosphoric or citric acid to convert the remaining non-hydralable phospholipids (Ca, Mg salts) into hydratable phospholipids.

Step 3.Neutralising of the free fatty acids with a slight excess of sodium hydroxide solution, followed by the washing out of soaps and hydrated phospholipids.

Step 4.Bleaching with natural or acid-activated clay minerals to adsorb colouring components and to decompose hydroperoxides.

Step 5.Deodorising to remove volatile components, mainly aLDhydes and ketones, with low threshold values for detection by taste or smell. Deodorisation is essentially a steam distillation process carried out at low pressures (2-6 mbar) and elevated temperatures (180-220°C).

Our Edible oil refining machine advantages:

Safety:

1) We use auto welding machine to make the reactor,which can quarrantee the quality of welding seam,avoid cracking and has a long life for about 8 years.
2) Professional heating treatment and x-ray detection chamber for welding seam .
3) Vacuum system to prevent oil gas be back to reactor causing accident.
4) With professional thermometer , professiona pressure gauge and safety valve.

Environment friendly:

1) Dedusting system to prevent gas and dust from coal burning
2) The exhaust gas will be recycled for heating reactor ,no gas pollution
3) Well sealing on every junction parts to prevent gas leak,no smelly

Longer service life :Using Q345R special steel plate ,welding seam with auto welding an will get heating treatment and x-ray detection to extend the life of reactor to the most extend, and the life will 8 years.

Energy saving:1) Well sealing for heating system ,no gas leak and saving fuel.
2) The exhaust gas will be recycled for reactor heating.

Welcome you to visit our web:

www.LDmach.com

Oil refining means separating impurity from oil based on the different characteristics of oil and impurity, in order to enhance the stability and security of oil. Oil refining including two technologies, physical refining and chemical refining.echnological process details of 2014 new type palm oil refining:
AAA1

1. Acid reaction process
Oil temperature can be adjusted by screw plate heat exchanger. When the temperature is heated to about 80℃, mixing about 85% food grade phosphoric acid into acid reaction tank for reacting. In the tank, most non-hydrated phospholipid transfer into hydrated phospholipid.
AAA1

2. Neutralization process
In the neutral section, degummed oil with appropriate temperature and the appropriate concentration of alkali liquor, into the neutralization centrifugal mixer mixing, in order to achieve the effect of mixed, the mixture is then sent to neutralization tank for enough time, in this process, excessive alkali neutralization of free fatty acids and some phosphate form soapstock , after pumping oil soap mixture into heater oil heating to 85 ~ 90 ℃ in centrifuge separation oil - soap (or oil - glue). Oil soapstock of the separated (or foot) feet into the oil tank, and then to the salting out with soap pump tank isolated part of the oil.
AAA2

3. Washing process
Neutral oil from separator, still contains about 500 ppm soap, in order to reduce the residual content of soap, oil is joined by about 10% of hot water, washed in the washing mixer, hot water will absorb oil soap and other impurities, then in the water separator are separated.

AAA3

If you have any demand about microwave drying equipment and edible oil refining equipment, pls feel free contact us any time.

LD Miss Candy
Skype: leaderfoodmachine9
Mobile: +86 18363700691 (Also WhatsApp & Wechat)
Email: [email protected]

Shandong Leader Machinery Co.,ltd. is a microwave equipment, microwave drying sterilization machine, microwave heating equipment, microwave drying machine, microwave sterilization equipment, microwave drying equipment, whole s microwave curing equipment, microwave drying sterilization condiment, Shandong microwave drying Machine, melon seeds microwave dryer and other products specializing in the production and processing company, has a complete and scientific quality management system. Shandong Leader Machinery Co.,ltd.integrity, strength and quality of products recognized by the industry.

Why do you choose the Shandong Leader Machinery Co.,ltd. 2014 new type palm oil refining?
1.Healthy! Pure mechanical squeezing craft maximally keeps the nutrients of the oil plants.No chemical substances left
2. High working efficiency! Due to a high working efficiency of the screw oil press machinery,both time and power can be saved.
3. Long durability! All the parts are made of the most suitable material and treated with refined crafts, such as cemented quenching and tempering to increase the hardness, consequently the durability.
4. 2014 new type palm oil refiningCost-effective! Low investment! The wearing parts on the oil press machinery such as the squeeze loop, squeeze spiral and squeeze bar are designed to be dismountable. When they are out of service period, users only need to replace them and there is no need to displace the whole machine.

Shandong Leader Machinery Co.,Ltd.
Tel:+86 0531 85064681
Fax:+ 86 0531 85064682
Skype： taishan0072
What’sApp:+86 18905316466
Email: [email protected]

Address: No. 225, Huangqiao Village, Beiyuan, Tianqiao District, Jinan, Shandong, China

 

 

 

At Shandong Leader Machinery Co.,Ltd, we have one single goal in mind: to make you a satisfied customer. That single focus, driven from every aspect of the company's operation, is the key to our ongoing success. If you're a satisfied customer, you'll come back to us when you have additional Machine needs in the future, and you'll tell your friends about us. Then if we can make them satisfied customers, the cycle continues.

——————————————————————Wendy Yao Director